Case IH WD6 Tractor Official Operator’s Manual

DELIVERY REPORTS
SPECIFICATIONS 
DESCRIPTION
Before starting your tractor 
Instruments and controls 
Preparing your tractor for each day’s work
View of tractor 
OPERATING YOUR TRACTOR
Driving the tractor 
Operating the Diesel engine 
LUBRICATION
Chassis lubrication chart
Engine lubrication chart 
General engine lubrication
Greasing front wheels
Lubricating oil and grease specifications 
Oil filter
MAINTENANCE
Air cleaning system 
Brakes
Carburetor 
Clutch 
Cold weather operation .
Diesel fuel filter (for Bosch injection pump) 
Diesel fuel filters (for IH injection pump)
Diesel fuel system 
Diesel fuel water trap 
Drawbar and hitch
Gasoline strainer and sediment bowl 
Injection pump
Injection pump governor
Injection pump timing
Magneto
Periodic inspections
Pneumatic tires
Pressure-type cooling system
Spark plugs and cables
Storing and housing the tractor
Trouble shooting 
Valve clearance adjustment
Venting air from the fuel system
Wheels 
Wiring, starting and lighting
SPECIAL EQUIPMENT 
COMPREHENSIVE INDEX
Capacities (U. S. Measure)
Air cleaner oil cup 
Fuel tank 
Gasoline tank 
Water cooling system
Crankcase pan 
Injection pump ( Bosch ) 
Injection pump (IH)
Steering gear housing 
Transmission and differential case
Engine (Diesel Type)
Cylinders
Bore 
Stroke
Engine speed (governed) (maximum full load) 
Power take-off shaft speeds (clockwise rotation)
Maximum – full load
Low idle – no load
Fast idle – no load 
Fuel injection pump 
Carburetor – IH type {dual manifold starting)
Magneto (counterclockwise)
Spark plug
Valve clearance (engine hot) 
Clutch and Belt Pulley
Single plate, dry disk (spring loaded)
Pulley speeds
Low idle – no load 
Fast idle – no load 
Maximum – full load . 
Belt speed (with ll-inch pulley) 
PPuulllleeyy dfaicaem eter 
Special – furnished when ordered
Foot Brakes
External contracting on drums
Speed {miles per hour)
Reverse
5th speed locked out when us ing steel wheels.
Wheels and Tread
Front wheels (pneumatic tire size ) 
Rear wheels {pneumatic tire size)
Tread – front read – rear .
Wheelbase .
General Dimensions
Length overall 
Width overall – (to outside edge of rear tires)
Height overall (to top of air cleaner) .
Clearance under front axle .
Drawbar – vertical adjustment above ground
Drawbar – lateral adjustment .
Turning radius (without brake applied)

========================================